Enencom - environmental pollution free - gravity electricity generator

ENENCOM

For over 100 years humans have tried and failed to invent a technology that generates electricity without the need for external fuels. No credible scientist would entertain any notion that such a machine could be possible. Enencom has not created a new form of energy, we are not claiming that this new technology will put out more energy then it puts in. All we have done is to take Kinetic energy, store it at one point (this has now become potential energy) and release it at another point. The wheel works on the SAME principle as the Water Wheel, one side is kept heavier than the other at all times.The Waranlinc Wheel has 16 arms 8 of the 16 arms has a bullet in it, these bullets run backward and forward.
When the wheel spins it avoids equilibrium in other words one side of the wheel is kept heavy at all times.

How the wheel works

The main piston chamber spring is compressed on the up cycle and the ram is locked. This is now stored energy.
The energy in the compressed chamber spring is released at the firing point, propelling a bullet weight upwards to the top where a one way gate allows the bullet to go up but does not come down.
At the firing point the gate is kept open by two pistons pushing down on the gate arm. Once the arm is in the energy-stored position, the piston reverts back into its hole.
The energy stored in the main piston chamber spring is made possible by the large weight gliding up and down on the outer tube. The weight is attached to a piston that run up and down in the hydraulic chamber the kinetic movement of the outer weight is transferred via the piston through a set of rods and onto the main piston chamber spring, which result in the ram arm locking (energy-stored).
The energy in the spring is released at the firing point when past via two side rod, the two switch on the arm is pulled back there by firing the bullet.
Starting the Waranlinc wheel spinning is simple, the wheel is primed at an angle, the brake applied this means the wheel is unable to spin once the brake is taken off the wheel begins to spin. Stopping the wheel spinning you apply the brakes.
More information is available subject to approval of Enencom and a good reason for the request.
Enencom has also invented the generator that when attached to the wheel produces electricity.

...ENENCOM...

Search our site here